RS – RS/T – RS/I – heating belts with silicone insulation

The RS thermal-belt is mostly used to maintain temperatures up to 140°C. It is equipped with a silicone insulation and is entirely waterproof. It can have any output up to 60W/m and is most frequently constructed for a supply voltage of 230V or 400V, but it can change on request. The heating belt must be controlled by a thermostat or other regulator.

RS – RS/T – RS/I – heating belts with silicone insulation

RS - silicone heating belt

RS/T - RS heating belt with a tin-plated copper braiding, serving as a mechanical protection and grounding
RS/I - RS heating belt with a stainless steel braiding, serving as a mechanical protection and grounding with an increased chemical resistance

  RP RP/T - RP/I RS RS/T - RS/I
Maximal output 20 W/m 60 W/m
Output tolerance ±10%
Max. supply voltage 500 V
Diameter 3,0 x 12,0 mm 3,5 x 12,5 mm 3,0 x 12,0 mm 3,5 x 12,5 mm
Diameter tolerance +0,2/-0,1 mm
Cold feed length 1 m, longer on request
Heating element Cu-Ni or Ni-Cr resistance wire
Heating element insulation 105 °C PVC silicone rubber
Termination contracting tube with glue waterprof silicone mould
Max. cable surface temperature 90°C 200°C
Min. cable surface temperature -30°C -70°C

Application

References

Documents for download
RS catalogue sheet
CE agreement declaration RS


back to: FLEXTAPE heating belts