CSC2K - heating cables for drainpipes with a built-in thermostat

The CSC2K heating cable derives from the CSC2 type, but in addition, it has a built-in thermostat at the blind end of the heating cable. The heater is designated for positioning in collecting tubs of heat pumps and in cooling chambers. The built-in thermostat initiates the heating based on the environment temperature, so the heater can function independently on the other devices.

CSC2K - heating cables for drainpipes with a built-in thermostat

 

 
  CSC2K
Output 40 or 50 W/m
Output tolerance ±10 %
Max. supply voltage 500 V
Diameter 5,0 x 7,0 mm
Diameter tolerance +0,2/-0,1 mm
Cold feed length 1 m
Heating element Cu-Ni or Ni-Cr resistance wire
Heating element insulation silicone rubber
Insulation on the thermostat termination contracting tube with glue
Thermostat set at +5/+15°C
Max. permitted surface temperature 200 °C
Min. permitted surface temperature -70 °C
 
CSC2K standard heaters 230 V:
Heating section length [m] 40 W/m 50 W/m
1 40 W 50 W
1.3 52 W 60 W
1.5 60 W 75 W
2 80 W 100 W
3 120 W 150 W
4 160 W 200 W
5 200 W 250 W
6 240 W 300 W

Note: Heaters with a 50W/m output are most frequently used. A 40W/m output is recommended for plastic pipes.

Application

References

Documents for download
CSC2K catalogue sheet
CE agreement declaration CSC2K


back to: FLEXDRAIN heating cables for drains